Ansul CLASS B AR-AFFF 3%x3% Concentrate Foam Tote - 446443

CLASS B POLAR SOLVENTS ANSULITE A335 3%x3% AR-AFFF Concentrate Foam Tote - 446443

Source Availablity
This product is currently out of stock in all of our hub locations.
Availability

Out of stock

SKU 446443
Price Unit Each
Price on Request

* All Prices are VAT Included

* The ultimate shipping cost will be displayed during the checkout process

Description

Ansul CLASS B AR-AFFF 3%x3% Concentrate Foam Tote - 446443

ANSULITE A335 3x3 AR-AFFF (Alcohol Resistant Aqueous Film-Forming Foam) Low Viscosity Concentrate combines fluoro- and hydrocarbon-surfactant technologies to provide superior fire and vapor suppression for Class B, polar solvent and hydrocarbon fuel fires. The low viscosity of this concentrate enables ease of proportioning in a wide range of equipment such as in-line eductors, balanced pressure systems, built-in systems aboard ARFF (Aircraft Rescue and Fire Fighting) and other emergency response vehicles. This synthetic foam concentrate is intended for forceful or gentle firefighting applications at 3% solution on hydrocarbon fuels and at 3% solution on polar solvent fuels in fresh, salt, or hard water.

ANSULITE A335 foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance:

  • The foam blanket blocks oxygen supply to the fuel.
  • Liquid drains from the foam blanket and forms either: An aqueous film on a hydrocarbon fire, or A polymeric membrane on a polar solvent fire which suppresses the vapor and seals the fuel surface.
  • The water content of the foam solution produces a cooling effect for additional fire suppression.

 

TYPICAL PHYSIOCHEMICAL PROPERTIES AT 77 °F (25 °C)

  • Appearance Viscous yellow liquid
  • Density 1.02 + 0.02 g/ml
  • pH 7.0 - 8.5
  • Refractive Index 1.3525 minimum
  • Viscosity* 1600 + 300 cPs 
  • Sediment** ≤ 0.25%
  • Spreading Coefficient 3 dynes/cm minimum at 3% dilution
  • Pour Point 25 °F (-4 °C)
  • Freeze Point 23 °F (-5°C)
  • Brookfield Viscometer Spindle #4

ANSULITE A335Concentrate is a non-Newtonian fluid that is both pseudoplastic and thixotropic. Due to these properties, dynamic viscosity will decrease as shear increases. The ANSULITE A335 3x3 AR-AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. telomer-based that does not produce PFOS.010252

 

Approvals, Listings, and Standards

ANSULITE A335 3x3 AR-AFFF Concentrate is designed in accordance with National Fire Protection Association (NFPA) Standard 11 for Low-, Medium-, and High-Expansion Foam. 

  • EN 1568: 2008
  • Parts 1, 3, 4

 

Application

ANSULITE A335 3x3 AR-AFFF Concentrate is intended for use on both types of Class B fires: hydrocarbon fuels with low water solubility, such as crude oils, gasolines, diesel fuels, and aviation fuels; and polar solvent fuels with appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone.It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance.

ANSULITE A335 Concentrate can be ideal for fixed, semifixed, and emergency response firefighting applications such as:

  • Industrial chemical and petroleum processing facilities
  • Fuel or chemical storage tanks
  • Truck/rail loading and unloading facilities
  • Flammable liquid containment areas
  • Mobile equipment

 

Foaming Properties

ANSULITE A335 3x3 AR-AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at the correct dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium.

ANSULITE A335 Concentrate requires low energy to foam and the foam solution may be applied with aspirating and non-aspirating discharge devices. Non-aspirating devices, such as handline water fog/stream nozzles, or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Aspirating low-expansion discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1.

 

TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water)

  • Proportioning Rate 3%
  • Expansion Ratio > 8.0
  • 25% Drain Time (min:sec) > 9:00
  • 50% Drain Time (min:sec) > 13:30

**per EN 1568-3, 2008 protocol

 

Proportioning

The recommended operational temperature range for ANSULITE A335 3X3 AR-AFFF Concentrate is 35 °F to 120°F (2 °C to 49 °C) per UL-162. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as:

  • Balanced and in-line balanced pressure pump proportioners
  • Balanced pressure bladder tanks and ratio flow controllers around the-pump type proportioners
  • Fixed or portable in-line venturi type proportioners
  • Handline nozzles with fixed eductor/pick-up tubes
  • For immediate use: The concentrate may also be premixed with fresh or salt water to 3% solution for hydrocarbon fuel fires or a 3% solution for polar solvent fuel fires.
  • For delayed use: Consult Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only).

 

More Information
SKU 446443
Manufacturer ANSUL
Brand ANSUL
Price Unit Each
Standards EN
Size Tote
Concentration 5-3%x3%
Country of Manufacture United States
Is Featured No
Approvals -EN 1568: 2008
Reviews
Write Your Own Review
You're reviewing: Ansul CLASS B AR-AFFF 3%x3% Concentrate Foam Tote - 446443
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

YOU MAY ALSO LIKE!

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
WILLIAMS CLASS B AR-AFFF 3%x3% Concentrate Foam Tote - 704601
SAR 56,350.00

In stock

Available Locally

Ansul CLASS B AFFF 3% Concentrate Foam Drum, 55 gal - 442710
Price on Request

In stock

Available Locally

AMEREX 50 lb. Regular BC Dry Chemical Recharge Pail, Sodium Bicarbonate - 512
SAR 220.11

In stock

Available Locally

loader
Loading...