ANSUL KR-S2 Low-Expansion Foam Handline Nozzle 60 gpm (227 Lpm) - 415981

Two sizes are available for nominal flow rates of 60 gpm and 120 gpm at 100 psi (227 Lpm and 454 Lpm at 6.9 bar). Foam solution is sprayed through the nozzle and as air is drawn into the nozzle, foam is produced in the tube. Each nozzle has a ball shut-off valve. The nozzle tube is constructed of stainless steel with a tough polyurethane handle providing optimum protection against corrosion. 

Source Availablity
This product is currently out of stock in all of our hub locations.
Availability

Out of stock

SKU 415981
Price Unit Each
Price on Request

* All Prices are VAT Included

* The ultimate shipping cost will be displayed during the checkout process

Description

ANSUL KR-S2 Low-Expansion Foam Handline Nozzle 60 gpm (227 Lpm) - 415981

Two sizes are available for nominal flow rates of 60 gpm and 120 gpm at 100 psi (227 Lpm and 454 Lpm at 6.9 bar). Foam solution is sprayed through the nozzle and as air is drawn into the nozzle, foam is produced in the tube. Each nozzle has a ball shut-off valve. The nozzle tube is constructed of stainless steel with a tough polyurethane handle providing optimum protection against corrosion. Although the normal operating pressure is 75 psi to 100 psi (5.2 bar to 6.9 bar), a minimum operating pressure of 45 psi (3.1 bar) is acceptable. Foam concentrate is usually proportioned to the nozzle using the matching ANSUL Model Z eductor.

 

Features

  • Non-corrosive materials
  • Easy-to-operate ball shut-off valve
  • Lightweight for ease of handling
  • Good foam quality with pressure of 45 psi (3.1 bar) and greater

 

Application

The ANSUL® KR-S low-expansion foam handline nozzles can be used with all low-expansion foam agents such as fluoroprotein, aqueous film-forming-foam (AFFF), alcohol resistant AFFF, and Class A foam concentrates. These portable, air-aspirating nozzles can be used in a variety of flammable liquid hazard areas using ANSULITE Class B foam concentrates. Typical applications include municipal fire departments and Crash-FireRescue (CFR) vehicles; or for handline applications around tank farms, loading racks, aircraft hangars, and chemical plants. When using SILV EX PLUS Class A foam, an effective blanketing foam is produced. This blanketing foam is ideal for structural fire attack and other deep-seated fires involving tires, rolled paper, baled cotton and coal bunkers. The advantage of low expansion compared to medium-expansion foam is the greater stream range and superior cooling effect achieved by the higher water content.

More Information
SKU 415981
Manufacturer ANSUL
Brand ANSUL
Price Unit Each
Flow Rate 60 GPM
Country of Manufacture United States
Is Featured No
Reviews
Write Your Own Review
You're reviewing: ANSUL KR-S2 Low-Expansion Foam Handline Nozzle 60 gpm (227 Lpm) - 415981
loader
Loading...

check-circle You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

loader
Loading...