VIKING Firefighter Jacket Guardian RSG EN 469 - Model 001

VIKING Guardian is a revolutionary fire suit concept dedicated to protecting firefighters from exposure to the dangerous carcinogens and particles. The outer shell of the VIKING Guardian can easily be detached after attending a fire, leaving the liner as perfectly wearable garment back to the station.

VIKING Guardian Firefighter Jacket, RSG

Only superior materials are used to make the VIKING Guardian. The outer shell is made from VIKING Icon™ with highly resistant, durable and thermally stable PBI® fiber. PBI® is well known for outstanding protection against heat and flames. On the inside is a CROSSTECH® SR 2 layer laminate moisture barrier, which does not lose its high breathability even after exposure to extreme heat, and which, with the outer shell removed, continues to protect the wearer from several types of dangerous fluids and chemicals. Finally, the liner of the VIKING Guardian is an efficient and comfortable Nomex® quilt.

With the VIKING Guardian fire suit, a wealth of smart, practical and performance enhancing design features are included as standard, however, many more options and accessories are available. Also, while the stock color is Golden Brown, the jacket can be delivered in other colors upon request.

Product Details

• Type: Fire fighter jacket
• Sizes: 46-48/S, 50-52/M, 54-56/L, 58-60/XL, 62-64/2XL, 66-68/3XL
• Outer shell: VIKING ICON with PBI®, 205 gr/m²:
• color:Gold
• Lining: Nomex quilt / 2L spunlace, 250 g/m2
• Moisture barrier: Flameliner GC 2L, GORE® CROSSTECH®
• Stitching: 100% Meta-aramide
• Wristlets: Knitted cuff with 2 way stretch and thumb hole
• Spare parts: Yoke: S-5900380
• Retro-reflective patch 8 x 38 cm: S-59008380
• Detachable hood: S-5900372880
• Detachable ID number patch with transfer: S-5900194
• Approvals: CE approved acc. to EN 469:2005, Medium/long jacket to be worn with EN 469 approved mtrousers.

Materials

• Outer fabric:­VIKING ICON with PBI®
• Moisture barrier:­CROSSTECH® S/R
• Liner:­Nomex® quilt / 2L Spunlace
  ­

Reflective Trim

• 5 cm lime/grey/lime.
• Attached with double stitching.
• 2 rows at sleeve on bottom and on upper sleeve.
• 1 row around chest and 1 row around bottom of jacket.
• 2 vertical rows on back.

Pockets

• Box pockets with easy access strap in Kevlar.
• Pockets are reinforced with Kevlar twill in lower part.
• Mask pocket on right chest with easy access strap in Kevlar.
• 2 Radio pockets with access to inner pocket for PTT system in left side.
• Strap inside radio pocket for height adjustment
• Aerial straps on both left and right side above radios.
• Flat inner pocket in left side.

Miscellaneous

• Detachable outershell with zipper in both sides.
• Inspection zipper in hem of lining.
• Detachable snap hook strap with press buttons in both sides next to pockets.
• Brass snap hook attached in right side.
• Waist narrowing in outer shell.
• Long front flap.
• Extra felt in shoulder and elbow area.
• Kevlar reinforcement on elbows and hem of sleeves.
• Hanger strap attached outside beneath collar.
• Prepared for detachable hood with hook/loop and press buttons.
• Detachable hood with hook/loop and press buttons.
• Type of front zipper: 2 sliders, plastic.
• D-rings on both left and right side on top of collarbone.
• Kevlar strap on left side, next to right side of radiopocket.
• Prepared for ID-patches on lower left front and lower right back with or without ID-patches.