Description

The XP10-M module seamlessly integrates up to ten normally open contact devices, like pull stations and flow switches, with intelligent fire alarm control panels.

It’s designed for simple setup; you can assign the first address from 01 to 150, and it automatically allocates the next nine addresses for subsequent modules. It also allows for deactivation of two addresses if they're not in use.

The module reports the status (normal, open, or short) of connected devices back to the control panel. A single SLC input connects all modules, and they share a common power and ground for supervision. However, each monitor operates independently.

Additionally, the XP10-M boasts panel-managed green LED indicators, which the panel can set to blink, remain on, or turn off, providing clear status visibility.

Specifications

 
Standards and Certifications

• Compliant with UL Standard 864, 9th edition for safety and reliability.
• Ten Class B or five Class A addressable initiating device circuits for flexible system configuration.
• Features detachable plug-in terminal blocks suitable for 12 AWG (3.31 mm2) to 18 AWG (0.821 mm2) wires.
• Equipped with individual status indicators for each circuit.
• Ability to deactivate any unused addresses to streamline system setup.
• User-friendly rotary switches for easy address assignment.
• Configurable for either Class A or Class B circuit operation.
• Supports both FlashScan® and CLIP protocol for system compatibility.
• Offers a range of mounting options to suit various installation needs.
• Includes all necessary mounting hardware for immediate setup.